Velodyne SPL-800i Uživatelský manuál stáhnout pdf (Strana 11)

www.velodyne.com

SPL-800i User’s Manual - 5

LINE-LEVEL CONNECTION - OPTION A

Figure 1 shows connection from your home theater receiver to the LFE input on the back of your subwoofer.

Whenthesubwooferisinstalledinthisfashion,allofthelowfrequencyinformationfromyour“LFEOut”or

“SubwooferOut”onthebackofyourreceiverwillpassintoyourVelodynesubwoofer.Thisconnectionisthe

mostcommonconnectionmethodwhenusingyoursubwooferwitha5.1receiver.(Cableneeded:1monoRCA

cable.)

NOTE:Ifnotusinganexternalcrossover,youshouldusethebuiltincrossoverforoptimalperformance.When

usinga single channelinput(such as asurroundsoundprocessor’ssubwooferoutor LFE), theautoon/o

circuitsensitivitywillbeaected.Whenoneinputchannelisusedinsteadoftwo,theunitwillseelowersignal

levels presentat the inputs. This maycause theunit toturn o when listening atlow volumelevels. Ifthis

occurs,simplyusea“Y”adapter(availablefrommostdealers)toallowyourprocessor’ssinglesublinetobe

fed into both L&R inputs. This will make the unit turn on at lower signal levels.

Figure 1: Installation using LFE line-level inputs.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Žádné komentáře

Velodyne SPL-800i Uživatelský manuál Strana 11